News
Site Editor
Site
https://sendyfurniture.usa72.wondercdn.com/uploads/image/62bbf58691633.png
An outdoor lounge chair is a perfect addition to any yard or patio. It provides a comfortable place to relax and enjoy the beautiful weather. While there are plenty of lounge chairs available for purchase, making your own chair can be a great alternative. In this article, we will provide a step-by-step guide on how to make your own outdoor lounge chair.MaterialsThe first step in making yo
how to make an outdoor lounge chair
Views: 116
Author: Site Editor
Publish Time: 2023-06-27
Origin: Site
An outdoor lounge chair is a perfect addition to any yard or patio. It provides a comfortable place to relax and enjoy the beautiful weather. While there are plenty of lounge chairs available for purchase, making your own chair can be a great alternative. In this article, we will provide a step-by-step guide on how to make your own outdoor lounge chair.
Materials
The first step in making your outdoor lounge chair is gathering materials. You will need the following:
-
Two 2x4 boards that are 8ft long
-
One 1x4 board that is 8ft long
-
Two furring strips that are 8ft long
-
Outdoor fabric
-
Foam cushion
-
Deck screws
-
Wood glue
-
Sandpaper
-
Stain or paint(optional)
-
Saw
-
Screw gun
-
Tape measure
-
Pencil
Steps
Now that you have gathered all the materials, you can start building the outdoor lounge chair.
-
Start by cutting the 2x4 boards. Cut four pieces that are 31 inches long and four pieces that are 37 inches long.
-
Using wood glue and deck screws, attach the 31 inch boards to the 37 inch boards to form a rectangular frame. Make sure to use the tape measure and pencil to ensure the frame is square.
-
Cut two more 2x4s that are 31 inches long. Attach these to the center of the frame using wood glue and screws. This will form the seat support.
-
Next, cut the 1x4 board into four pieces that are 20 inches long. Attach these to the top of the frame using wood glue and screws. This will form the back support.
-
Cut the furring strips into 24 inch pieces. Attach these to the bottom of the seat support using wood glue and screws. This will form the legs of the chair.
-
Sand the entire chair to smooth out any rough spots or edges. If desired, you can add stain or paint to the chair to give it a finished look.
-
Cut the foam cushion to fit the seat and back of the chair. Cover the foam cushion with outdoor fabric and attach it to the chair using a staple gun.
Conclusion
Building your own outdoor lounge chair can be a fun and rewarding project. With a few materials and some basic tools, you can create a comfortable and stylish chair that will last for years to come. Whether you are an experienced builder or a novice, this project is a great way to flex your DIY muscles and add a unique piece to your outdoor space.