Recovering a dining chair is a great way to breathe new life into your old furniture. However, before you start the project, you need to figure out how much fabric you will need. The amount of fabric required will depend on the size of your chair, the shape of the seat and back, and the pattern of the fabric you choose. In this article, we’ll guide you through the process of determining the right amount of fabric for your dining chair project.
The first step in determining how much fabric you need to recover a dining chair is to measure your chair. Measure the length, width, and depth of the seat cushion, as well as the length and width of the chair back. If you have an upholstered back, measure the height and width of the upholstered area. Make sure to write down the measurements, as you will need them later.
Fabric repeat refers to the distance between the beginning of the pattern and where it starts again. If you are using a patterned fabric, you need to factor in the fabric repeat when calculating the amount of fabric you will need. To do this, measure the distance between two identical parts of the pattern and write it down. This measurement will help you calculate how much fabric you need.
To calculate the amount of fabric you will need, you first need to decide on the direction in which you will place the fabric. If your chair has a patterned fabric, you will need to make sure that the pattern is aligned correctly. Depending on the width of your fabric, you may need to join multiple pieces of fabric to cover your chair adequately.
The formula for calculating the amount of fabric you need is:
(Length of seat cushion + depth of seat cushion + length of back cushion + height of upholstered back) * 2 x number of chairs + [(fabric repeat / fabric width) x length of back cushion x number of chairs] = total fabric needed
For example, if you have two chairs and your measurements are as follows:
Your calculation would be:
(20 + 18 + 18 + 30) * 2 x 2 + [(12 / 54) x 18 x 2] = 5.3 yards
So, you would need around 5.3 yards of fabric to recover two dining chairs.
It’s always a good idea to add a little extra fabric when recovering a chair, especially if you have a patterned fabric. You will need some extra fabric to match the pattern correctly and cut around any irregularities in the fabric. A good rule of thumb is to add 1/2 yard to your total fabric needed for every two chairs. So, for our example above, you would need 5.8 yards of fabric to be safe.
Recovering a dining chair is a fun and affordable DIY project, but it’s essential to calculate how much fabric you need before you begin. Remember to measure your chair carefully, factor in the fabric repeat, and make allowances for cutting and pattern matching. By following these steps, you can ensure that you have enough fabric to complete your project successfully.
Copyright © 2022 Sendy Furniture Co.,Ltd. All Rights Reserved.Site MapDesigned by
